Liberon

LIBERON Wax Polish Black Bison (Paste) Carnauba Wood Feed EN71

  • Description
  • More Details

Black Bison Paste Wax

Product use:
Liberon Black Bison Fine Paste Wax is ideal for nourishing and protecting all types of wood, including lacquers and French polishes.

Black Bison is well known for its quality and distinctive, pleasant smell. It is traditionally used on antiques but is also suitable for use on modern furniture and will enhance the natural beauty of wood whilst protecting it against dryness.

  • Gives good resistance to finger and water marks
    Ideal for small surfaces
  • Feeds, polishes and helps prevent wood drying out
  • Highly lustrous and hard wearing
  • Helps cover marks and scratches
  • EN71 Part 3 Approved – Safe for toys
  • Approved by the Guild of Master Craftsmen
  • Silicone Free

 

USAGE
Interior

Preparation
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary.

Application
Apply Black Bison Fine Paste Wax sparingly with a cloth on a delicate / French polished surface or with Ultra Fine steel wool (Liberon grade 0000) when a deeper penetration is required.

Allow to dry for 20 minutes, or until touch dry, and then buff with a clean cotton cloth or furniture brush.

Repeat the operation on new or very dry wood as it may require two or more coats. For a better finish, buff with the Liberon Furniture Brush once the last coat has dried.

For a higher sheen build-up with thin coats of wax, buffing between coats.

Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.

Cleaning and maintenance
Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash with water.

Health and Safety
Flammable. Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children.

Do not empty into drains. Use only in well-ventilated areas.

If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.