Product useLiberon Rust Remover de-oxidises metal surfaces, removing rust and creating a barrier against oxidisation. It is suitable for use on ferrous metals, brass, copper and bronze. It can also be used to degrease and clean most metal surfaces prior to colouring with Liberon Antiquing Fluid, Haematite, Iron Paste or paint.
PreparationRemove loose rust with a wire brush.
ApplicationShake before use. Apply Rust Remover with a brush to the affected area only.
Allow the surface to whiten, brush off white film with a wire brush and repeat the process until no more white deposit appear. Then apply a final coat to inhibit re-oxidation.
Important:Always test product on a spare surface or inconspicuous area for colour compatibility and end result.
PrecautionsAlways wear rubber gloves and eye protection when using this product.
Heath and SafetyIrritant. Contains Phosphoric Acid. Flammable. Irritating to eyes and skin. Keep out of the reach of children. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains. Wear suitable gloves. If swallowed seek medical advice immediately and show this container or label. Use only in well-ventilated areas.
Charles Watson (Ironmongers) Ltd.125 Pellon Lane, Halifax. HX1 5QN
Telephone: 01422 251251 Fax: 01422 firstname.lastname@example.org
Company Reg. No: 532657 VAT Reg. No: 184 022 88