Tough Deck Clean & Revive
Product useLiberon Tough Deck Clean and Revive has been developed for cleaning old, tired and dirty natural wooden decking which has dulled and faded over time. It helps to remove black spotting caused by mould or lichen from most types of wood and helps to prevent the re-growth of fungi to leave the surface clean and ready for refinishing.
ApplicationStir well before use. Dilute Tough Deck Clean and Revive with up to 2 parts water in a bucket. Apply the cleaner using a scrubbing brush or stiff broom, rinse with clean water and repeat as necessary until the timber is clean.Wipe off any excess water and allow the timber to dry thoroughly, for a minimum of 24 hours, before applying any finishing products.
For stubborn marks, a stronger solution of Tough Deck Clean and Revive may be required.Important: Always test product on a spare surface or inconspicuous area for compatibility and end result.
Cleaning and maintenanceClean the wood as and when required prior to oiling or finishing.
PackagingTough Deck Clean and Revive is available in 2L containers.
Health and SafetyKeep out of the reach of children. Do not empty into drains. Use only in well-ventilated areas. Do not allow to freeze.
Charles Watson (Ironmongers) Ltd.125 Pellon Lane, Halifax. HX1 5QN
Telephone: 01422 251251 Fax: 01422 firstname.lastname@example.org
Company Reg. No: 532657 VAT Reg. No: 184 022 88